Commercial Vehicle Systems (CVS)

A frame-body attachment that goes over a sub-frame attached to the vehicle body and down both sides of the frame rail before being clamped at the bottom flange of the rail.

A type of high-capacity and high-energy density capacitors.

Eaton’s two-pedal AMT; completely shift by wire with no clutch pedal.

Means that you are predisposed to think a certain way about a subject or a person.

The smallest diameter in a spool; used to create a flow path when the valve is open.

Any ratio that decreases output speed while increasing output torque. Also known as a gear reduction.

A suspension system where the leaf spring is mounted under the axle.

The depth of the area between the bottom of the original tread grooves and the top of the uppermost belt.

A global electronic service and communication protocol for mechatronic devices that has encrypted security features to prevent malicious network hacking.

A standard outlining the properties and characteristics of fasteners using imperial units of measurement.